Pro Video Tripod Kit Rapid SVT-75 Pro + Video Head VHS10

Sirui Pro Video Tripod Kit Rapid SVT-75 Pro + Video Head VHS10

Pro Video Tripod Rapid SVT-75 Pro

Compared with traditional knob or flip leg lock setup tripods, SIRUI SVT75 is One-Step Height Adjustment design, which means that you can pull only one ergonomic flip on every leg to set up and lock the tripod.
With these ergonomic flip located at the top of the tripod legs, makes it easily to adjust the tripod height.
All the legs of the tripod can be deployed simultaneously and can quickly adjust to the height that you need, depending on the ground’s surface – eliminating the need to bend over or manually adjust multiple brakes on each leg. Even with heavy equipment, this One-Step Height Adjustment design allows adjusting height up and down quickly and flexibly, which is suitable for quick moving shooting.

Ergonomic flip-lock design helps operate easily even with gloves.
Strong locking force prevents the equipment from accidental falling.

This tripod is equipped with a 75mm bowl, and can be used with Sirui 75mm Half-Bowl Quick Release Handle (included in this Pro version) for fast and smooth adjust of horizontal use.

The diameter of each leg is 40mm.
Besides, carbon fiber construction decreases the weight an at the same time increases the stability.
The maximum load is 25kg, making it possible to carry heavy equipment and shoot for longer time.

The mid-level spreader (included in this Pro version) can be added to help stabilize the entire support system.
You can extend or retract the length of the spreader to help fine adjust the angle of the legs via twist-lockings.

Fixed legangles - Each leg can be locked in one of the three positions (22°, 50° and 78°) via the semi-automatic knob.

The height of the tripod can be adjusted from as low as 21cm (without midspreader) to 153cm (without head).

The tripod have feet of "Dual spikes" which is compatible with SIRUI DT-06 Tripod Dolly or other universal accessories, and can be used also with including horseshoe feet, which works well on even ground and increases the stability of tripod.

This Pro-version also include a very practical carrying handle, which can be mounted with a built-in 4mm Allen key, which also helps adjust tightness of quick release plate quickly.

VHS10 Professional Fluid Head
Because of fluid friction and 7 steps counterbalance, the head can work well in harsh conditions.
3+0 damping adjustment, 0-10 kg load capacity and professional panning and tilting control are perfect for creating high-end productions.

7 Steps Counterbalance
Almost all professional tripods are designed with counterbalance system to fit cameras with different weight. 7 steps counterbalance on VHS10 makes it possible to stop the camera at any position you like, independent of camera size, up to a maximum of 10kg

3+0 Steps Damping Adjustment
The counterbalance adjustment is not stepless, so adding or removing accessories may break the balance. 3+0 steps damping adjustment of panning and tilting can help balance the equipment with different weight during shooting.

The head have 360 degrees panning and -65 - +90 degrees tilting.

Side Loading Plate
Instead of the traditional insert method, side loading is designed on VHS10 head, which means that you can insert either lightweight or heavy equipment from one side easily and quickly. After side loading, there is a 30mm back and forth range for adjustment, extremely suitable for shooting with telephoto lens

Safely and quickly insert and detach
Locking block, safety pin, rubber pad and locking flip are all included to prevent your equipment from falling off.

75mm Half-bowl Quick-release Handle
Most half-bowl handles come with disadvantages of long thread with low efficiency and they will also become loose after frequent use. However, SIRUI 75mm Half-Bowl Quick-release Handle allows quick release with only 2 seconds. Just rotate the handle 2 turns, press the knob and pull out the handle.